Nimonic C263 Sheet, Nimonic C263 Sheet Importers, Nimonic C263 Sheet Suppliers, Nimonic C263 Sheet Exporter, Nimonic C263 Sheet Stockists.
Nimonic C263 Sheet in India, Nimonic C263 Sheet Importers in India, Nimonic C263 Sheet Suppliers in India, Nimonic C263 Sheet Exporter in India, Nimonic C263 Sheet Stockists in India.
Nimonic C263 Sheet in Mumbai, Nimonic C263 Sheet Importers in Mumbai, Nimonic C263 Sheet Suppliers in Mumbai, Nimonic C263 Sheet Exporters in Mumbai, Nimonic C263 Sheet Stockists in Mumbai.
Nimonic 263 Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 263 Sheet, Nimonic 263 Coil, Nimonic 263 Clad Plate, Nimonic 263 Flat Sheet and Nimonic 263 Rolling Plate. NIMONIC alloy 263 (UNS N07263, 2.4650) is precipitation-hardenable nickel-chromium-cobalt alloy with an addition of molybdenum for solid-solution strengthening. The alloy is good oprion for sheet applications. These alloys are characterised by their high-temperature low-creep and high performance. Nimonic 263 has high strength and corrosion resistance along with good formability and high-temperature ductility in welded structures. These high temp Nimonic 263 Plates are suitable for gas turbines for rings, casings, and various sheet fabrications and can be used up to about 1650°F (900°C). Alloy C263 plate - Nimonic 263 plate exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for other gamma prime strengthened alloys. Alloy 263 Plate combines properties & special features make it best choice for a variety of fabricated components in both aircraft turbine engine and landbased turbine applications. Nimonic® C-263 Plate is also known as Nicrofer 5120 CoTi Plate, Haynes 263 Plate, and Hastelloy C-263 Plate.
If you are looking for Nimonic 263 Shim feel free to contact at stindia@stindia.com for any assistance of Nimonic 263 Rolling Sheets & Nimonic Alloy 263 Plate as well Nimonic 263 Sheet welding. Our support team will give you prompt response to all your queries regarding Nimonic 263 Sheets Plates even on holidays.
Typical Mechanical Properties of Nimonic 263 Sheet
| Material | Temp °C | Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation % |
Hardness HRC |
|---|---|---|---|---|---|
| Nimonic 263 Sheet Solution Treated (AMS 5872 / BS HR206) |
RT | - | - | - | 22.5 max |
| Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206 |
RT | 580 (typical) | 973 (typical) | 39 - | |
| Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206 |
780 | 403 (min) | 541 (min) | 9 | - |
Nimonic 263 Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Nimonic 263 | 2.4650 | N07263 |
Nimonic 263 Plates Chemical Composition
| Grade | Ni | Co | Cr | Mo | Ti | Fe | Mn | Al | Si | Cu | C | B | S |
| Nimonic 263 | 49 | 19-21 | 19-21 | 5.60-6.10 | 1.90-2.40 | 0.70 | 0.60 | 0.60 | 0.40 | 0.20 | 0.040 – 0.080 | 0.0050 | 0.0070 |